Miami / Air Duct Care
Find the work you need.
A dusty grille doesn’t tell the whole story. Start with the condition of the system, then choose the scope that makes sense.
Assessment
Assessment & Documentation
Duct Condition Assessment
There is visible debris, an odor, moisture, pests, or a concern that needs to be checked rather than assumed.
Pre-Cleaning HVAC Inspection
A cleaning scope has been proposed but the accessible system and materials have not been documented.
Visible Contamination Documentation
Someone has reported mold, debris, or another condition without showing where it is.
Whole-System Scope Review
A quote names only one duct section although the concern may involve more of the forced-air system.
Post-Cleaning Visual Check
Work is complete but the homeowner has not seen how cleanliness was verified.
Access-Port Planning
The system cannot be inspected or cleaned through existing openings alone.
Duct Material Assessment
The system may use bare sheet metal, flex duct, duct board, or internally lined duct, each needing different care.
System Cleaning
Whole-System Cleaning
Whole HVAC System Cleaning
The assessment documents substantial debris, pests, or visible contamination across more than one system component.
Supply Duct Cleaning
Excessive debris is documented in supply-side ductwork or is being released from supply registers.
Return Duct Cleaning
Excessive debris is documented in return-side ductwork beyond normal dust on a return grille.
Supply Register Cleaning
Supply-register surfaces are visibly dirty or debris is documented at the outlet.
Return Grille Cleaning
A return grille has visible dust and the assessment identifies cleaning it as part of the agreed work.
Diffuser Cleaning
A diffuser is visibly soiled or included in a documented whole-system scope.
Air-Handler Housing Cleaning
The assessment documents debris in the accessible air-handling-unit housing.
Components
Component Care
Cooling Coil Cleaning
A cooling coil is documented as dirty during HVAC service or a condition-led assessment.
Heat Exchanger Cleaning Assessment
A qualified HVAC assessment identifies a heat-exchanger cleaning need within its proper safety scope.
Condensate Pan Cleaning
Standing water or debris is documented in a cooling-system condensate pan.
Fan Motor & Housing Cleaning
Debris is documented around the accessible fan motor or housing during a complete system assessment.
Filter Holder & Bypass Check
A filter is missing, clogged, or air can bypass gaps around the holder.
Access Opening Restoration
An access hole or door used for inspection or cleaning needs to be left sealed and insulated.
Conditions
Condition Response
Visible Mold Next-Step Assessment
There is substantial visible growth inside hard-surface ducts or on HVAC components.
Wet or Moldy Fiberglass Duct Referral
Fiberglass duct board or liner is wet or visibly moldy.
Pest or Excessive Debris Cleanup
Ducts are infested with pests or clogged with excessive dust and debris.
Renovation Dust Response
Construction or renovation dust entered registers or the HVAC system was run during dusty work.
Chemical Treatment Review
A provider proposes a biocide, ozone, or sealant inside ductwork.